All Products in NMC

Three - Nozzle Filler machine

3 Nozzle Filling machine is a linear filler, mainly used in production lines like tomato paste line, fruit pulp and so on. this stainless steel filler can fill 4500 pet containers, jar and cans per hour ( 400 g to 1000 g.). The filler can be equipped with a mixer and a steam jacket to enhance filling and guaranteeing the quality of the filled products. Merits Equipped with a PLC programming...

see more about Three - Nozzle Filler machine

MODEL : KPT 4014 3A

Single-nozzle Filler

Single-nozzle filling machine has 2 linear systems and is suitable for Production Line with low capacities or limited capacity to fill low and high viscosity products. This machine is capable of filling about 600 containers (can, jar, pet or so on) per hour. It is suitable for filling container from 300gr to 1000 gr. Advantages Enhanced functioning Robust structure (made of stainless...

see more about Single-nozzle Filler

MODEL : KPT 270

Automatic Filling Machine

High capacity canned filling machine is mainly 33 nozzles which are used for filling products such as fruits, beans and so on in canned food production and packing lines. Advantages: Increase work efficiency Increase production speed Workforce reduction

see more about Automatic Filling Machine

MODEL : KPT 2088

8-Nozzle Filler

The eight-piston filling machine with a rotary system is one of the main machines in the packing line of the tomato paste Precise and reliable operation Very low depreciation due to perfect engineering design Robust and beautiful structure (made of stainless steel) Low tolerance difference in filling Capacity: 6000 per hour

see more about 8-Nozzle Filler

MODEL : KPTfvb27

Wax Filling

Wax Filling machine is among the linear fillers and is suitable to fill wax in different containers ( metal and non-metal containers) from 50 to 250 mg in volume. This fully automatic machine is equipped with two nozzles and a 650 liter tank. Since the temperature matters in filling wax and wax like products, it is equipped with a temperature control and a mixer to ensure...

see more about Wax Filling

MODEL : KPT 1090

Liquid Filler

Liquid Filler is equipped with a number of nozzles for filling cans or jars with liquids like brine, sauce, oil and etc . this machine actually contains two units that each equipped with a tank therefore, each tank can contain different liquids. This ability makes the Liquid Filler a suitable choice for Tuna Fish line or other ready made foods. Advantages: Increase production speed Reduce...

see more about Liquid Filler

MODEL : KPT 4002

Liquid Filler

This machine is one of the most important machines in the canning and pickling line. It is placed after the filling machine and fills sauce, brine or other liquids Advantages: Increase production speed Increase productivity of raw materials Increase the health and quality of the product because it is done without interference

see more about Liquid Filler

MODEL : KPT 4070

Inspection, control and weighing line

Conveyor belt is one of the First machines made by Khorasan Packaging Tools Company, which is responsible for transferring products, cans ,jars an so on in production lines. ]t can also enhance inspection . Additionally, there is always room for this machine in any production line. This conveyor belt is made of P.P and has a durable and beautiful chassis. Merits: Made of S.S304 Robust and...

see more about Inspection, control and weighing line

MODEL : مدل: KPTtiw250

Dewatering Machine

The NMC"s Dewatering machine is applied to dewater or dry the surface of cans or jars after final washing. Sometimes during production process and after sealing, some drops of water or moisture remain on the surface of cans or jars which not only disrupts the shrink packing or Cartoning process but also causes some stains on the jar or cans and therefore affects the beauty of the final product.

see more about Dewatering Machine

MODEL : KPTD2700

Dewatering Tunnel

This machine is a convenient and efficient way to dewater carrots by blowing air through the fan . Dewatering is a crucial step before final packing since the extra moister inside packages will cause the product to be rotten. Merits: Equipped with fans Made of S.S 304

see more about Dewatering Tunnel

MODEL : KPT 850 C

Dewater Incline conveyor

This incline conveyor not only carries the products but also helps to dewater them after being washed. This machine is a must in Fruit and vegetable washing and packing lines. Advantages: Increase production efficiency Reduce workforce robust structure Practical and facilitating Stainless steel

see more about Dewater Incline conveyor

MODEL : KPT 850 C

Drying and Cooling Tunnel

The drying and cooling tunnel is used to dry or cool the washed jars before filling. This machine is generally used for dewatering sterilized jars in jam production lines and cooling of mayonnaise jars. The design of the drying and cooling tunnel made by Khorasan Packaging Tools Company is all iron with epoxy paint and the transfer belt is made of galvanized mesh Other benefits: Transfer...

see more about Drying and Cooling Tunnel

MODEL : KPT 2700

Exhauster Tunnel

While existence of air is vital to live, it is fatal for food and in long run can lead to food decay. In canning process, it is important to create vacuum in a can and seal it, and mostly it is done only with injecting Nitrogen. but now a days, food industry is familiar with a cost-effective way and that is the introduction of exhauster machine. Exhauster is a tunnel like machine that cans and...

see more about Exhauster Tunnel

MODEL : KPT 60035

Cartoning (Pick and Place)

The Pick and Place Machine is an automatic machine suitable for increasing the speed of packing cans and jars in cartoons. This Cartoning or pick and place machine is equipped with an arranging head and a placing one. This machine made by Khorasan Packaging Tools Company (NMC) is able to load 150 cans per minute with sufficient accuracy.

see more about Cartoning (Pick and Place)

MODEL : KPT CR20

Semi-Automatic Shrink Pack

This machine is a highly used one in food production and packaging lines. It can be used to shrink pack all jars and cans The shrink tunnel can feed products, seal and cut film and shrink film bag . It is widely used in food, pharmaceutical, auto parts, hardware, electrical appliances and other industry. Advantages: Equipped with heating system tunnel Equipped with a control panel

see more about Semi-Automatic Shrink Pack

MODEL : KI 101

Labelling Machine

The Product’s ID is beautifully printed on the labels which applied on the cans jars and other packing alike. Information like the producer’s name and address certificates standards expiration date and so on all sits on a label on a can jar or etc. and this awesome work is what Labelling Machine does. Labelling Machine can dispense and apply labels on one side or both sides of a jar can...

see more about Labelling Machine

MODEL : KPT N15000

Shrink Seal Caps/Shrink Bands

If you are looking for a machine to stick (shrink) plastic reels around the cap of jars or so on, Shrink seal cap is the best option for you. This automatic machine is to shrink plastic bands around the cap of jars and other containers. Shrinking plastic bands around the cap not only add to the beauty of your container but also can seal the cap and prevent leakage. Therefore Shrink seal cap is...

see more about Shrink Seal Caps/Shrink Bands

MODEL : KPT CP6001

Weighing and Packing

Product Weighing and Packing Machine: Used for weighing and packing in plastic bags or boxes and used in washing and packaging lines of various products such as carrots dried fruits and products. Advantages: Increase product health Determine product weight Reduced packaging error Practical and facilitating

see more about Weighing and Packing

MODEL : KPT 9595

Shrink labeling(sleeve shrink) machine

Shrink labeling machine performs the labeling as well as the ring or sheaths around the door with the thermal system the function of this device is defined in two ways the steam heating system and the electrical heating system by element The heat exchange system in the tunnel of the device can be selected by steam or an electric element Shrink labeling machine can be used for a variety of...

see more about Shrink labeling(sleeve shrink) machine

MODEL : KPT 6000

Label shrink

Steam Label Shrink is used to stick (shrink) plastic reels around the jar or other containers . After the plastic reel is put on the jar it go through the steam tunnel to shrink the reel around it. The plastic reels usually contain the product’s information and they add to the visual beauty of the product. They can be applied in different production lines such as pickles, jam, tomato paste,...

see more about Label shrink

MODEL : KPT 6001

Get in Touch with Us

Khorasan Packaging Tools Company is one of the leading factories in the field of manufacturing machinery. Relying on the 50 years hands-on experience and applying the modern technology in producing machinery for food and chemical industry, it has tried over years to improve the quality and quantity of production line whether in food industry or chemical industries.
This company, which started its work in 1974 was able to gain the trust of customer through guaranteeing the efficient function of its machinery, we are proud that our resume is decorated with the names of reputable and well-known domestic and foreign companies and brands.

Address : No. 340 11 st. Sanat blvd. Phase 1 Tous Industrial Estate

Phone :
+98-513-541-3053
+98-513-541-3054
+98-513-541-1353
Email : info[at]nmc-co[dot]com

follow us on social media

File Ext: zip, rar, pdf, docx, xlsx, jpg, png
Max size: 5MB

Products Video All Products Fillers Seamers Production Line Slicers Autoclaves Blanchers Pasteurizers Peelers Final packing Cooking Formulation Can washers Product Washers